Low-iron float glass has a high transmittance. Soda-lime float glass products are engineered for use in a variety of solar applications. It can be also used as deposit substrate of TCO glass or as the cover of the CIGS, CIS, CdTe, a-Si thin film PV Modules. It also can be utilized in Flat-plate solar collector and Solar reflection mirrors. For 4 mm or thinner glass products,its visible light transmittance≥91.8%,Solar direct transmission≥90.4%(ISO 9050) . This is attributable to its low iron content and glass chemical composition, allowing it to be tempered without spontaneous breakage.
Applications:
Glass Substrate for Thin-Film Solar/Flat-Plate / Solar Collectors/Solar Reflection Mirrors/Glass Substrate For Solar Panels/Building/Doors & Windows/Glass Curtain Walls / Glass Furniture/Internal Building Partitions / Storefront Windows /Show Rooms/Glass Guardrails and Escalators etc.
Product Performance:
Even Internal Stress, Easy For Cutting;
High visible light transmittance and the best value of the zebra angle;
Easy processing for tempering and hot-bending etc;
Thickness: 1.8~4.0mm;
Size: Normal Size:2440*3660mm; Maximum Size:3660*6000mm ;
Technical Parameters
Thickness (mm) | Transmittance (%) | ||||
Ultraviolet | Visible | Infrared | Total solar | PV Range Solar | |
3.2 | 88.9 | 91.9 | 90.3 | 90.8 | 91.0 |
4.0 | 88.1 | 91.8 | 90.0 | 90.5 | 90.8 |
All the data utilized within the table are based on the 2003 edition of the international standard ISO 9050 to measure. The range of wave length is: ultraviolet: 300-380 nm, infrared: 780-2500 nm, solar: 300-2500 nm, solar photovoltaic range 400-1100 nm.
光谱曲线图 Spectral Curve Chart
Thermal Performance
玻璃/镀膜半球辐射率Glass/Coating Hemispherical Emissivity (-18~66 ℃) | 0.84 |
线性膨胀系数Linear Expansion Coefficient (20~300 ℃) | 8.7*10-6/℃ |
比热 Specific Heat (0~100 ℃) | 858 J/(kg*k) |
导热性Thermal Conductivity (50 ℃) | 1.00 W/(m*k) |
软化点Softening Point | 721 ℃ |
退火点Annealing Point | 545 ℃ |
应变点Strain Point | 509 ℃ |
玻璃化转变温度Transition Temperature (Tg) | |
609 ℃ |
Mechanical Performance
玻璃/镀膜半球辐射率Glass/Coating Hemispherical Emissivity (-18~66 ℃) | 0.84 |
线性膨胀系数Linear Expansion Coefficient (20~300 ℃) | 8.7*10-6/℃ |
比热 Specific Heat (0~100 ℃) | 858 J/(kg*k) |
导热性Thermal Conductivity (50 ℃) | 1.00 W/(m*k) |
软化点Softening Point | 721 ℃ |
退火点Annealing Point | 545 ℃ |
应变点Strain Point | 509 ℃ |
玻璃化转变温度Transition Temperature (Tg) | 554 ℃ |
软化温度 Intenerate Temperature | 609 ℃ |
Thick On-Line Low-E Coating Float Glass:
We use the world’s advanced CVD technology (Chemical Vapor Deposition )to coat a low- emissivity functional layer on float glass surface during the glass production.
Product performance:
1.In summer:Low- emissivity functional layer will reduce sun’s heat energy, allowing the interior to remain more cool and comfortable.
2. In winter: The interior heat will be reflected back within building by utilizing low- emissivity functional layer, reducing heat loss and increasing heating efficiency.
3. High visible light transmittance and low emissivity (E≤0.18);
4. Easily processed; it can be tempered, hot-bent, etc;
5. No need to remove coating edge when making insulate glass units.
6. The tin-oxide coating has stable mechanical properties and the durable coating does not oxidize.
7. Coating can come in direct contact with conveyor rollers without damage.
8. Can be directly applied to laminated glass production. U value reaches 3.4 W/m2K when the layer is used in the fourth surface.
Thickness: 4~8mm
SIZE - Normal Size:2440*3660mm; Maximum Size:3660*6000mm;
Applications:
Building / Doors & windows / Glass Curtain Walls / Building Internal Partitions / Storefront Windows / Show Rooms / Glass Guardrails and Escalators etc.;
Technical Parameters:
PHOTOMETRIC PROPERTIES | ||||||||||||||
玻璃产品 | 厚度 | 可见光 Light Characteristics | 太阳热能 Energy Characteristics | U-值 | ||||||||||
透光率 | 反光率Reflection | 热直透率 | 热反射率 | 热吸收率 | 热能系数 | 遮阳系数 | U-Value | |||||||
外Out | 内In | Trans | Reflection(%) | Abs | Solar Factor | Shading Coefficient | ||||||||
L.T. | L.R. | L.R. | D.E.T | E.R | E.A. | S.F. | S.C. | AIR | ||||||
12mm在线低辐射(LOW-E) | ||||||||||||||
12mm 在线低辐射(LOW-E)#2+12A+12mm |
Ultra-Clear On-Line LOW-E Coating Float Glass:
This is the first Ultra-Clear On-Line Low-E coating float glass in China.
Product performance:
1.In summer:Low- emissivity functional layer will reduce sun’s heat energy, allowing the interior to remain more cool and comfortable.
2. In winter: The interior heat will be reflected back within building by utilizing the low- emissivity functional layer, thusly reducing heat loss and increasing heating efficiency.
3. High visible light transmittance and low emissivity (E≤0.18);
4. Easily processed; it can be tempered, hot-bent, etc;
5. No need to remove coating edge when making insulated glass units.
6. The tin-oxide coating has stable mechanical properties and the durable coating does not oxidize.
7. Coating can come in direct contact with conveyor rollers without damage.
8. The coating can be directly applied to laminated glass production. U value reaches 3.4 W/m2K when the layer is used in the fourth surface and is especially suitable for the outer layer of the double-skin facades.
Thickness: 4~8mm;
SIZE- Normal Size:2440*3660mm; Maximum Size:3660*6000mm;
Applications: Buildings /Doors & Windows/Glass Curtain Walls/Building Internal Partitions/Storefront Windows/ Show Rooms/Glass guardrails and escalators etc.;
Technical Parameters:
On-Line Thick Plate LOW-E Coating Float Glass:
We use the world’s advanced CVD technology (Chemical Vapor Deposition )to coat a low- emissivity functional layer on float glass surface during the glass producing.
Product performance:
1.In summer:Low- emissivity functional layer will reduce sun’s heat energy, allowing the interior to remain more cool and comfortable.
2. In winter: The interior heat will be reflected back within building by utilizing low- emissivity functional layer, reducing heat loss and increasing heating efficiency.
3. High visible light transmittance and low emissivity (E≤0.18);
4. Easily processed; it can be tempered, hot-bent etc.
5. No need to remove coating edge when making insulate glass units.
6. The tin-oxide coating has stable mechanical properties and the durable coating does not oxidize.
7. Coating can come in direct contact with conveyor rollers without damage.
8. Can be directly applied to laminated glass production. U value reaches 3.4 W/m2K when the layer is used in the fourth surface.
9. This can be widely used in building lobbies, podium buildings,storefront windows, etc. Its U value reaches 3.8W/m2K ,higher than 5.8 W/m2K, the value of ordinary thick plate float glass. The value reduced by almost 40% !
Thickness: ≥12mm
SIZE- Normal Size:2440*3660mm ; Maximum Size:3660*6000mm;
Applications: Buildings / Doors & Windows/Glass Curtain Walls / Building Internal Partitions / Storefront Windows/ Show Rooms/ Thermal Insulation / Glass Guardrails and escalators etc.